
High Speed Roll Paper Flexo Ruling Cold Glue Tape Binding Production Line
1.This machine features microcomputer control, photoelectric tracking, pneumatic-hydraulic linkage and HMI touchscreen operation, as well as water-based ink flexographic printing and other advanced technologies. It uses eco-friendly, scientifically formulated water-based ink and adhesive as raw materials.
The integrated production line combines over 20 working procedures: unwinding, high-speed flexo ruling, perforation, sheeting, folding, slitting, collecting, clamping, title page feeding, cover feeding, jogging, gluing, drying, tape binding, tape cutting, conveying, trimming, book counting and delivering. It is the optimal equipment for mass production of books in the printing and bookbinding industry.
2.The machine only requires four operators in total: one supervisor, one assistant and two general workers.
1.Unwinding unit :
1.Roll Paer: 1piece
2.Paper lifting : Motor control and lifting by chain
3.Tension Control: Magnetic powder braking system
4.Paper diameter: 1300MM
5.Paper Width: 1200MM
6.Roll paper clamping way: Air shaft 7.Tension control system:Fully automatic, floating roller type
2.Printing unit :
1.Printing group : 4 sets
2.Printing way: one paper two color double side
3.Printing size: repeat length:780mm width:1200mm
4.Printing speed: max.printing speed:300m/min max machine speed:350m/min
3.Folding unit :
1.Paper sheeting: 3 sets
2.Paper perforation line: 3 sets 3.Paper folding:
3 sets Max. folded width: 300mm Min. folded width: 125mm
4.Slitting unit :
1.Slitter shaft: 1 set Bottom knife:Fixed seat mounting Top Knife:Rotary knife roller + blade
2. Traction unit: 1set; The traction roll is steel ; The press roll is rubber Traction rolls are clamped with cylinders 3.Slitting accuracy: Length tolerance: +/-1mm<1000mm Slope tolerance: +/-1mm/1000mm
4.Main motor: the main motor is a 30KW/AC motor installed in the cuttling unit
5.Paper counting unit :
1. Counting range: 32-200 pages(8-50sheets)
2. Gripper feed system: Clamp unit: 2set Gripper feed system: mechanically driven by CAM curve Clamp System: mechanical control using CAM curve
3.Transmission way: first with the flat belt continuous transmission, and then with the synchronous belt intermittent transmission
6.Cross feeding :
1. Feeding way: conveyor by chain push paper
2.Number of feeder: 4 sets
3.Book flapping
7.Tape binding :
1.Book conveying mode: books are continuously conveyed and clamped by chain positioning blocks. The rear conveying section will stop automatically when no signatures are fed.
2.Cover gluing system: equipped with three brushing units. The heating glue tank supports both hot melt glue and cold glue.
3.Drying unit: 2 sets of infrared heating lamps.
4.Tape binding mechanism: during gluing operation, the glue roller is driven by the main motor to keep its linear speed synchronized with book conveying. When not in use, it runs via a separate motor and separates from the back strip. The glue wheel assembly is driven by an independent motor.
8.Book cutting unit :
Books are fed into the system, then go through conveying, cross cutting, slitting, counting and final collection. This machine adopts the latest four-column cutting structure, featuring high cutting precision and easy tool adjustment.
9.Finished book collection :
Finished products can be stacked automatically, with stack quantity adjustable from 1 to 20.
| Model |
KT-GNB760 |
| Maximum diameter of roll paper |
1300 mm |
| Roll paper width |
390-1200 mm |
| Paper thickness range |
50-180 gsm |
| Printing length |
300-785 mm |
| Printing width |
1200 mm |
| Maximum printing speed |
350 m/min |
| Maximum number of copies |
50 copies/min |
| Slitting size |
570-790 mm |
| Number of layers |
32-200 pages (8-50 sheets) |
| Cover thickness |
60-500 gsm |
| Max.finished book size |
300*300 mm |
| Min.finished book size |
125*125 mm |
| Max.finished book thickness |
15mm |








